Fernco QT-150 1-1/2 in. Qwik Tee, 90° Flexible Tee
Product Overview
The Fernco QT-150 Qwik Tee is a 1-1/2 in. flexible 90-degree tee for compatible drain, waste, and vent pipe repairs. Its extended flexible body helps reconnect three pipe runs after an old fitting is removed and can simplify alignment in confined repair locations.
Key Features:
- 1-1/2 in. flexible 90-degree tee
- Extra length supports fitting-replacement repairs
- Flexible body helps align three compatible pipe runs
- 300 series stainless steel clamps
- May be adapted with compatible Qwik Bushings sold separately
- Compatible with select clay, plastic, steel, copper, or lead pipe based on outside diameter
Common Uses:
- Replacing a cut-out DWV tee
- Adding or reconnecting a branch in compatible drain or vent piping
- Repair work where rigid tee alignment is difficult
Technical Specifications:
- Nominal Size: 1-1/2 in.
- Configuration: 90-degree flexible tee
- Dimensions A, B, and C: 1.88 in.
- Clamp Material: 300 series stainless steel
- Maximum Test Pressure: 4.3 PSI
- Maximum Operating Temperature: 140°F
- Standard: ASTM D5926
Installation & Compatibility Note:
Confirm all three pipe outside diameters and materials before ordering. Compatible Qwik Bushings may be used to create approved reducing connections and are sold separately.
FAQ
Can this replace a rigid tee removed during repair?
Yes. Its flexible extended design can help reconnect three compatible pipe runs.
Can the tee be reduced?
Compatible Qwik Bushings may be used where the required size and application are approved.
Is it intended for high-pressure water lines?
No. It is intended for compatible low-pressure drain, waste, and vent applications.
Why Buy From Big Frog Supply?
Big Frog Supply provides clear product details, helpful support, and fast online ordering.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Fernco QT-150 1-1/2 in. Qwik Tee, 90° Flexible Tee
Fernco QT-150 1-1/2 in. Qwik Tee, 90° Flexible Tee
Product Overview
The Fernco QT-150 Qwik Tee is a 1-1/2 in. flexible 90-degree tee for compatible drain, waste, and vent pipe repairs. Its extended flexible body helps reconnect three pipe runs after an old fitting is removed and can simplify alignment in confined repair locations.
Key Features:
- 1-1/2 in. flexible 90-degree tee
- Extra length supports fitting-replacement repairs
- Flexible body helps align three compatible pipe runs
- 300 series stainless steel clamps
- May be adapted with compatible Qwik Bushings sold separately
- Compatible with select clay, plastic, steel, copper, or lead pipe based on outside diameter
Common Uses:
- Replacing a cut-out DWV tee
- Adding or reconnecting a branch in compatible drain or vent piping
- Repair work where rigid tee alignment is difficult
Technical Specifications:
- Nominal Size: 1-1/2 in.
- Configuration: 90-degree flexible tee
- Dimensions A, B, and C: 1.88 in.
- Clamp Material: 300 series stainless steel
- Maximum Test Pressure: 4.3 PSI
- Maximum Operating Temperature: 140°F
- Standard: ASTM D5926
Installation & Compatibility Note:
Confirm all three pipe outside diameters and materials before ordering. Compatible Qwik Bushings may be used to create approved reducing connections and are sold separately.
FAQ
Can this replace a rigid tee removed during repair?
Yes. Its flexible extended design can help reconnect three compatible pipe runs.
Can the tee be reduced?
Compatible Qwik Bushings may be used where the required size and application are approved.
Is it intended for high-pressure water lines?
No. It is intended for compatible low-pressure drain, waste, and vent applications.
Why Buy From Big Frog Supply?
Big Frog Supply provides clear product details, helpful support, and fast online ordering.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Product Overview
The Fernco QT-150 Qwik Tee is a 1-1/2 in. flexible 90-degree tee for compatible drain, waste, and vent pipe repairs. Its extended flexible body helps reconnect three pipe runs after an old fitting is removed and can simplify alignment in confined repair locations.
Key Features:
- 1-1/2 in. flexible 90-degree tee
- Extra length supports fitting-replacement repairs
- Flexible body helps align three compatible pipe runs
- 300 series stainless steel clamps
- May be adapted with compatible Qwik Bushings sold separately
- Compatible with select clay, plastic, steel, copper, or lead pipe based on outside diameter
Common Uses:
- Replacing a cut-out DWV tee
- Adding or reconnecting a branch in compatible drain or vent piping
- Repair work where rigid tee alignment is difficult
Technical Specifications:
- Nominal Size: 1-1/2 in.
- Configuration: 90-degree flexible tee
- Dimensions A, B, and C: 1.88 in.
- Clamp Material: 300 series stainless steel
- Maximum Test Pressure: 4.3 PSI
- Maximum Operating Temperature: 140°F
- Standard: ASTM D5926
Installation & Compatibility Note:
Confirm all three pipe outside diameters and materials before ordering. Compatible Qwik Bushings may be used to create approved reducing connections and are sold separately.
FAQ
Can this replace a rigid tee removed during repair?
Yes. Its flexible extended design can help reconnect three compatible pipe runs.
Can the tee be reduced?
Compatible Qwik Bushings may be used where the required size and application are approved.
Is it intended for high-pressure water lines?
No. It is intended for compatible low-pressure drain, waste, and vent applications.
Why Buy From Big Frog Supply?
Big Frog Supply provides clear product details, helpful support, and fast online ordering.
