Stiebel Eltron Tempra 12 Trend Tankless Water Heater 239213
Stiebel Eltron Tempra 12 Trend Tankless Water Heater 239213
Product Overview
The Stiebel Eltron Tempra 12 Trend is a highly efficient, compact tankless electric water heater engineered to deliver a continuous and unlimited supply of hot water on demand. Operating at a 0.94 Uniform Energy Factor (UEF) and a 93% recovery efficiency, this unit activates its copper-sheathed heating elements instantaneously as water flows through it. By heating water only when needed, it completely eliminates the standby heat loss associated with conventional tank water heaters, providing a highly reliable and energy-saving solution for modern residential spaces.
Equipped with exclusive Electronic Temperature Control, the Tempra 12 Trend monitors incoming water conditions and adjusts its power stages to ensure a steady output temperature, even when flow rates fluctuate. Its space-saving wall-mount profile features an alpine white sheet steel cover and a backlit digital display, making configuration clear and accessible. With an electronic switch that provides virtually silent operation, this German-engineered system delivers premium performance in a small footprint.
Key Features:
- Electronic Temperature Control: Ensures a steady and predictable output temperature by constantly monitoring incoming flow and adjusting heating element engagement.
- On-Demand Heating Efficiency: Achieves a 0.94 UEF to lower energy waste and save on monthly utility costs by entirely eliminating standby thermal losses.
- Backlit Digital Display: Provides a clear, intuitive interface that shows temperature settings and power capacity, complete with an adjustable safety temperature lock.
- Silent Operation: Built with an electronic switch instead of mechanical contactors to function quietly without disruptive clicking noises during activation.
Technical Specifications:
- Voltage: 240 V or 208 V
- Phase: Single 50/60 Hz
- Wattage: 12 kW (at 240V) / 9 kW (at 208V)
- Amperage Draw: 50 A (at 240V) / 44 A (at 208V)
- Minimum Recommended Circuit Breakers: 1 x 50 A Double Pole (DP)
- Number of Runs & Minimum Wire Size: 1 x 8/2 AWG Copper
- Dimensions: 16-5/8" W x 14-1/2" H x 4-5/8" D
- Weight: 13.5 lb (6.1 kg)
- Nominal Water Volume: 0.13 gal (0.5 L)
- Water Connections: 3/4" NPT
- Working / Tested Pressure: 150 psi (10 bar) / 300 psi (20 bar)
- Uniform Energy Factor (UEF) / Recovery Efficiency: 0.94 / 93%
Installation & Versatility:
- Electrical Panel Requirements: Requires a minimum main service electrical panel rating of 100 A to safely accommodate the unit's operational load.
- Low Activation Threshold: Triggers the interior copper heating system at a minimum flow rate of 0.37 GPM (1.4 L/min) to comfortably support low-flow plumbing fixtures.
- Flexible Temperature Range: Adjusts easily via the front dial to deliver water temperatures between 68°F (20°C) and 140°F (60°C).
- High Input Compatibility: Safely accepts pre-heated inlet water temperatures up to 131°F (55°C), making it versatile for inline boosting applications.
Common Applications:
- Small Homes & Apartments: Acts as an efficient standalone whole-house water heater for smaller residential spaces with moderate point-of-use demands.
- Point-of-Use Fixtures: Supplies on-demand hot water directly to dedicated locations like bathrooms, powder rooms, or remote sinks to eliminate long pipe runs.
- Inline System Boosting: Installs down-line from a primary water source to safely boost temperatures and maintain warmth over extended plumbing distances.
Frequently Asked Questions:
- Q: What is the maximum temperature rise this unit can provide at a flow rate of 1.50 GPM?
- A: When operating at 240V, the Tempra 12 Trend provides a 54°F temperature rise at 1.50 GPM. On a 208V power supply, it provides a 41°F temperature rise at the same flow rate.
- Q: Does this model include Advanced Flow Control?
- A: No, Advanced Flow Control is an exclusive feature found on the Tempra Plus models. The Tempra Trend models utilize Electronic Temperature Control to maintain steady delivery under normal capacities.
- Q: What material is used for the heater's cover?
- A: The water heater is constructed with a durable Alpine White sheet steel cover.
The Stiebel Eltron Tempra 12 Trend offers a compact, silent, and highly efficient solution for homeowners and DIYers seeking reliable, on-demand hot water without the bulk of a traditional storage tank.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Stiebel Eltron Tempra 12 Trend Tankless Water Heater 239213
Stiebel Eltron Tempra 12 Trend Tankless Water Heater 239213
Stiebel Eltron Tempra 12 Trend Tankless Water Heater 239213
Product Overview
The Stiebel Eltron Tempra 12 Trend is a highly efficient, compact tankless electric water heater engineered to deliver a continuous and unlimited supply of hot water on demand. Operating at a 0.94 Uniform Energy Factor (UEF) and a 93% recovery efficiency, this unit activates its copper-sheathed heating elements instantaneously as water flows through it. By heating water only when needed, it completely eliminates the standby heat loss associated with conventional tank water heaters, providing a highly reliable and energy-saving solution for modern residential spaces.
Equipped with exclusive Electronic Temperature Control, the Tempra 12 Trend monitors incoming water conditions and adjusts its power stages to ensure a steady output temperature, even when flow rates fluctuate. Its space-saving wall-mount profile features an alpine white sheet steel cover and a backlit digital display, making configuration clear and accessible. With an electronic switch that provides virtually silent operation, this German-engineered system delivers premium performance in a small footprint.
Key Features:
- Electronic Temperature Control: Ensures a steady and predictable output temperature by constantly monitoring incoming flow and adjusting heating element engagement.
- On-Demand Heating Efficiency: Achieves a 0.94 UEF to lower energy waste and save on monthly utility costs by entirely eliminating standby thermal losses.
- Backlit Digital Display: Provides a clear, intuitive interface that shows temperature settings and power capacity, complete with an adjustable safety temperature lock.
- Silent Operation: Built with an electronic switch instead of mechanical contactors to function quietly without disruptive clicking noises during activation.
Technical Specifications:
- Voltage: 240 V or 208 V
- Phase: Single 50/60 Hz
- Wattage: 12 kW (at 240V) / 9 kW (at 208V)
- Amperage Draw: 50 A (at 240V) / 44 A (at 208V)
- Minimum Recommended Circuit Breakers: 1 x 50 A Double Pole (DP)
- Number of Runs & Minimum Wire Size: 1 x 8/2 AWG Copper
- Dimensions: 16-5/8" W x 14-1/2" H x 4-5/8" D
- Weight: 13.5 lb (6.1 kg)
- Nominal Water Volume: 0.13 gal (0.5 L)
- Water Connections: 3/4" NPT
- Working / Tested Pressure: 150 psi (10 bar) / 300 psi (20 bar)
- Uniform Energy Factor (UEF) / Recovery Efficiency: 0.94 / 93%
Installation & Versatility:
- Electrical Panel Requirements: Requires a minimum main service electrical panel rating of 100 A to safely accommodate the unit's operational load.
- Low Activation Threshold: Triggers the interior copper heating system at a minimum flow rate of 0.37 GPM (1.4 L/min) to comfortably support low-flow plumbing fixtures.
- Flexible Temperature Range: Adjusts easily via the front dial to deliver water temperatures between 68°F (20°C) and 140°F (60°C).
- High Input Compatibility: Safely accepts pre-heated inlet water temperatures up to 131°F (55°C), making it versatile for inline boosting applications.
Common Applications:
- Small Homes & Apartments: Acts as an efficient standalone whole-house water heater for smaller residential spaces with moderate point-of-use demands.
- Point-of-Use Fixtures: Supplies on-demand hot water directly to dedicated locations like bathrooms, powder rooms, or remote sinks to eliminate long pipe runs.
- Inline System Boosting: Installs down-line from a primary water source to safely boost temperatures and maintain warmth over extended plumbing distances.
Frequently Asked Questions:
- Q: What is the maximum temperature rise this unit can provide at a flow rate of 1.50 GPM?
- A: When operating at 240V, the Tempra 12 Trend provides a 54°F temperature rise at 1.50 GPM. On a 208V power supply, it provides a 41°F temperature rise at the same flow rate.
- Q: Does this model include Advanced Flow Control?
- A: No, Advanced Flow Control is an exclusive feature found on the Tempra Plus models. The Tempra Trend models utilize Electronic Temperature Control to maintain steady delivery under normal capacities.
- Q: What material is used for the heater's cover?
- A: The water heater is constructed with a durable Alpine White sheet steel cover.
The Stiebel Eltron Tempra 12 Trend offers a compact, silent, and highly efficient solution for homeowners and DIYers seeking reliable, on-demand hot water without the bulk of a traditional storage tank.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Stiebel Eltron Tempra 12 Trend Tankless Water Heater 239213
Product Overview
The Stiebel Eltron Tempra 12 Trend is a highly efficient, compact tankless electric water heater engineered to deliver a continuous and unlimited supply of hot water on demand. Operating at a 0.94 Uniform Energy Factor (UEF) and a 93% recovery efficiency, this unit activates its copper-sheathed heating elements instantaneously as water flows through it. By heating water only when needed, it completely eliminates the standby heat loss associated with conventional tank water heaters, providing a highly reliable and energy-saving solution for modern residential spaces.
Equipped with exclusive Electronic Temperature Control, the Tempra 12 Trend monitors incoming water conditions and adjusts its power stages to ensure a steady output temperature, even when flow rates fluctuate. Its space-saving wall-mount profile features an alpine white sheet steel cover and a backlit digital display, making configuration clear and accessible. With an electronic switch that provides virtually silent operation, this German-engineered system delivers premium performance in a small footprint.
Key Features:
- Electronic Temperature Control: Ensures a steady and predictable output temperature by constantly monitoring incoming flow and adjusting heating element engagement.
- On-Demand Heating Efficiency: Achieves a 0.94 UEF to lower energy waste and save on monthly utility costs by entirely eliminating standby thermal losses.
- Backlit Digital Display: Provides a clear, intuitive interface that shows temperature settings and power capacity, complete with an adjustable safety temperature lock.
- Silent Operation: Built with an electronic switch instead of mechanical contactors to function quietly without disruptive clicking noises during activation.
Technical Specifications:
- Voltage: 240 V or 208 V
- Phase: Single 50/60 Hz
- Wattage: 12 kW (at 240V) / 9 kW (at 208V)
- Amperage Draw: 50 A (at 240V) / 44 A (at 208V)
- Minimum Recommended Circuit Breakers: 1 x 50 A Double Pole (DP)
- Number of Runs & Minimum Wire Size: 1 x 8/2 AWG Copper
- Dimensions: 16-5/8" W x 14-1/2" H x 4-5/8" D
- Weight: 13.5 lb (6.1 kg)
- Nominal Water Volume: 0.13 gal (0.5 L)
- Water Connections: 3/4" NPT
- Working / Tested Pressure: 150 psi (10 bar) / 300 psi (20 bar)
- Uniform Energy Factor (UEF) / Recovery Efficiency: 0.94 / 93%
Installation & Versatility:
- Electrical Panel Requirements: Requires a minimum main service electrical panel rating of 100 A to safely accommodate the unit's operational load.
- Low Activation Threshold: Triggers the interior copper heating system at a minimum flow rate of 0.37 GPM (1.4 L/min) to comfortably support low-flow plumbing fixtures.
- Flexible Temperature Range: Adjusts easily via the front dial to deliver water temperatures between 68°F (20°C) and 140°F (60°C).
- High Input Compatibility: Safely accepts pre-heated inlet water temperatures up to 131°F (55°C), making it versatile for inline boosting applications.
Common Applications:
- Small Homes & Apartments: Acts as an efficient standalone whole-house water heater for smaller residential spaces with moderate point-of-use demands.
- Point-of-Use Fixtures: Supplies on-demand hot water directly to dedicated locations like bathrooms, powder rooms, or remote sinks to eliminate long pipe runs.
- Inline System Boosting: Installs down-line from a primary water source to safely boost temperatures and maintain warmth over extended plumbing distances.
Frequently Asked Questions:
- Q: What is the maximum temperature rise this unit can provide at a flow rate of 1.50 GPM?
- A: When operating at 240V, the Tempra 12 Trend provides a 54°F temperature rise at 1.50 GPM. On a 208V power supply, it provides a 41°F temperature rise at the same flow rate.
- Q: Does this model include Advanced Flow Control?
- A: No, Advanced Flow Control is an exclusive feature found on the Tempra Plus models. The Tempra Trend models utilize Electronic Temperature Control to maintain steady delivery under normal capacities.
- Q: What material is used for the heater's cover?
- A: The water heater is constructed with a durable Alpine White sheet steel cover.
The Stiebel Eltron Tempra 12 Trend offers a compact, silent, and highly efficient solution for homeowners and DIYers seeking reliable, on-demand hot water without the bulk of a traditional storage tank.
