Corona Lighting T-LT150 150W 12-15V Stainless Steel Transformer
Product Overview
The Corona Lighting T-LT150 is a 150W stainless steel low-voltage landscape lighting transformer for compatible single-circuit lighting systems. It provides 12V, 13V, 14V, and 15V secondary taps to support voltage adjustment on compatible landscape lighting runs.
The transformer is the power source for the complete low-voltage circuit, so selection begins with the combined operating load of every connected lamp and integrated fixture—not the number of fixtures alone. Cable length, wire gauge, branch layout, and voltage drop determine which secondary tap is appropriate at installation. Keep the total connected load within the listed capacity and allow suitable design margin rather than planning at the absolute limit. Before installation, confirm the 120V supply, mounting location, cable entry, grounding, terminal arrangement, accessory compatibility, and local electrical requirements. Measure voltage under load and adjust taps only within the documented system limits.
Key Features:
- 150W single-circuit landscape lighting transformer
- Stainless steel enclosure
- 12V, 13V, 14V, and 15V secondary voltage taps
- Thermal shut-off primary protection
- Magnetic circuit breaker secondary protection
- Large terminal block for multiple low-voltage cable connections
- 6 ft grounded, water-resistant power cord with molded plug
- Compatible with listed Corona timer, photocell, and dimmer accessories
Common Uses:
- Low-voltage landscape lighting systems
- Single-circuit outdoor lighting transformer installations
- Voltage-tap support for compatible fixture runs
Technical Specifications:
- Brand: Corona Lighting
- SKU: T-LT150
- Wattage: 150W
- Primary Voltage: 120V
- Secondary Voltage: 12V, 13V, 14V, and 15V
- Core: Fully encapsulated toroid core
- Primary Protection: Thermal shut-off
- Secondary Protection: Magnetic circuit breaker
Dimensions:
- Overall Height: 13 in.
- Width: 6 in.
- Depth: 5-1/2 in.
Installation & Compatibility Note:
Confirm total system wattage, wire gauge, run length, voltage drop, transformer capacity, and local electrical requirements before installation. Do not exceed the transformer’s listed wattage rating.
FAQ
What wattage is this transformer?
It is listed as a 150W transformer.
What secondary voltage taps are available?
The listed secondary taps are 12V, 13V, 14V, and 15V.
What accessories are commonly used with it?
Listed compatible accessories include T-TR-FIP, T-FIT, T-FIDT, and CX-DIM_100.
Why Buy From Big Frog Supply?
Big Frog Supply provides clear product details, helpful support, and fast online ordering.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Corona Lighting T-LT150 150W 12-15V Stainless Steel Transformer
Corona Lighting T-LT150 150W 12-15V Stainless Steel Transformer
Product Overview
The Corona Lighting T-LT150 is a 150W stainless steel low-voltage landscape lighting transformer for compatible single-circuit lighting systems. It provides 12V, 13V, 14V, and 15V secondary taps to support voltage adjustment on compatible landscape lighting runs.
The transformer is the power source for the complete low-voltage circuit, so selection begins with the combined operating load of every connected lamp and integrated fixture—not the number of fixtures alone. Cable length, wire gauge, branch layout, and voltage drop determine which secondary tap is appropriate at installation. Keep the total connected load within the listed capacity and allow suitable design margin rather than planning at the absolute limit. Before installation, confirm the 120V supply, mounting location, cable entry, grounding, terminal arrangement, accessory compatibility, and local electrical requirements. Measure voltage under load and adjust taps only within the documented system limits.
Key Features:
- 150W single-circuit landscape lighting transformer
- Stainless steel enclosure
- 12V, 13V, 14V, and 15V secondary voltage taps
- Thermal shut-off primary protection
- Magnetic circuit breaker secondary protection
- Large terminal block for multiple low-voltage cable connections
- 6 ft grounded, water-resistant power cord with molded plug
- Compatible with listed Corona timer, photocell, and dimmer accessories
Common Uses:
- Low-voltage landscape lighting systems
- Single-circuit outdoor lighting transformer installations
- Voltage-tap support for compatible fixture runs
Technical Specifications:
- Brand: Corona Lighting
- SKU: T-LT150
- Wattage: 150W
- Primary Voltage: 120V
- Secondary Voltage: 12V, 13V, 14V, and 15V
- Core: Fully encapsulated toroid core
- Primary Protection: Thermal shut-off
- Secondary Protection: Magnetic circuit breaker
Dimensions:
- Overall Height: 13 in.
- Width: 6 in.
- Depth: 5-1/2 in.
Installation & Compatibility Note:
Confirm total system wattage, wire gauge, run length, voltage drop, transformer capacity, and local electrical requirements before installation. Do not exceed the transformer’s listed wattage rating.
FAQ
What wattage is this transformer?
It is listed as a 150W transformer.
What secondary voltage taps are available?
The listed secondary taps are 12V, 13V, 14V, and 15V.
What accessories are commonly used with it?
Listed compatible accessories include T-TR-FIP, T-FIT, T-FIDT, and CX-DIM_100.
Why Buy From Big Frog Supply?
Big Frog Supply provides clear product details, helpful support, and fast online ordering.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Product Overview
The Corona Lighting T-LT150 is a 150W stainless steel low-voltage landscape lighting transformer for compatible single-circuit lighting systems. It provides 12V, 13V, 14V, and 15V secondary taps to support voltage adjustment on compatible landscape lighting runs.
The transformer is the power source for the complete low-voltage circuit, so selection begins with the combined operating load of every connected lamp and integrated fixture—not the number of fixtures alone. Cable length, wire gauge, branch layout, and voltage drop determine which secondary tap is appropriate at installation. Keep the total connected load within the listed capacity and allow suitable design margin rather than planning at the absolute limit. Before installation, confirm the 120V supply, mounting location, cable entry, grounding, terminal arrangement, accessory compatibility, and local electrical requirements. Measure voltage under load and adjust taps only within the documented system limits.
Key Features:
- 150W single-circuit landscape lighting transformer
- Stainless steel enclosure
- 12V, 13V, 14V, and 15V secondary voltage taps
- Thermal shut-off primary protection
- Magnetic circuit breaker secondary protection
- Large terminal block for multiple low-voltage cable connections
- 6 ft grounded, water-resistant power cord with molded plug
- Compatible with listed Corona timer, photocell, and dimmer accessories
Common Uses:
- Low-voltage landscape lighting systems
- Single-circuit outdoor lighting transformer installations
- Voltage-tap support for compatible fixture runs
Technical Specifications:
- Brand: Corona Lighting
- SKU: T-LT150
- Wattage: 150W
- Primary Voltage: 120V
- Secondary Voltage: 12V, 13V, 14V, and 15V
- Core: Fully encapsulated toroid core
- Primary Protection: Thermal shut-off
- Secondary Protection: Magnetic circuit breaker
Dimensions:
- Overall Height: 13 in.
- Width: 6 in.
- Depth: 5-1/2 in.
Installation & Compatibility Note:
Confirm total system wattage, wire gauge, run length, voltage drop, transformer capacity, and local electrical requirements before installation. Do not exceed the transformer’s listed wattage rating.
FAQ
What wattage is this transformer?
It is listed as a 150W transformer.
What secondary voltage taps are available?
The listed secondary taps are 12V, 13V, 14V, and 15V.
What accessories are commonly used with it?
Listed compatible accessories include T-TR-FIP, T-FIT, T-FIDT, and CX-DIM_100.
Why Buy From Big Frog Supply?
Big Frog Supply provides clear product details, helpful support, and fast online ordering.
