DIG MP-122 Pop-Up Micro Sprayer, 180 Degree, 1/2 in. MNPT, 9 in. Pop-Up
Product Overview
The DIG MP-122 is a low-flow pop-up micro sprayer with a 180-degree pattern, 1/2 in. male pipe-thread inlet, and 9 in. pop-up height.
Key Features:
- 180-degree spray pattern
- 9 in. pop-up riser
- 1/2 in. MNPT inlet
- Stainless steel spring
- EPDM and vinyl seals
- Designed for low-flow overhead irrigation
Common Uses:
- Edges of flower beds and groundcover
- Plantings beside walls or walkways
- Areas needing a retracting micro-spray riser
Technical Specifications:
- Flow Range: 0.15-0.63 GPM
- Operating Pressure: 15-30 PSI
- Nominal Pressure: 30 PSI
- Maximum Wetting Diameter: 11.2 ft
- Filter Requirement: Minimum 80 mesh
- Pattern: 180 degrees
Dimensions:
- Pop-Up Height: 9 in.
- Inlet: 1/2 in. MNPT
Installation Notes:
Install with regulated, filtered water and orient the half-circle pattern along the edge of the planting area. Flush the line before installing the spray head.
FAQ:
What spray pattern does it provide?
180 degrees.
How high does it pop up?
9 in.
Why Buy From Big Frog Supply?
Big Frog Supply provides clear product information, helpful support, and convenient online ordering for micro-irrigation projects.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
DIG MP-122 Pop-Up Micro Sprayer, 180 Degree, 1/2 in. MNPT, 9 in. Pop-Up
DIG MP-122 Pop-Up Micro Sprayer, 180 Degree, 1/2 in. MNPT, 9 in. Pop-Up
Product Overview
The DIG MP-122 is a low-flow pop-up micro sprayer with a 180-degree pattern, 1/2 in. male pipe-thread inlet, and 9 in. pop-up height.
Key Features:
- 180-degree spray pattern
- 9 in. pop-up riser
- 1/2 in. MNPT inlet
- Stainless steel spring
- EPDM and vinyl seals
- Designed for low-flow overhead irrigation
Common Uses:
- Edges of flower beds and groundcover
- Plantings beside walls or walkways
- Areas needing a retracting micro-spray riser
Technical Specifications:
- Flow Range: 0.15-0.63 GPM
- Operating Pressure: 15-30 PSI
- Nominal Pressure: 30 PSI
- Maximum Wetting Diameter: 11.2 ft
- Filter Requirement: Minimum 80 mesh
- Pattern: 180 degrees
Dimensions:
- Pop-Up Height: 9 in.
- Inlet: 1/2 in. MNPT
Installation Notes:
Install with regulated, filtered water and orient the half-circle pattern along the edge of the planting area. Flush the line before installing the spray head.
FAQ:
What spray pattern does it provide?
180 degrees.
How high does it pop up?
9 in.
Why Buy From Big Frog Supply?
Big Frog Supply provides clear product information, helpful support, and convenient online ordering for micro-irrigation projects.
Original: $4.63
-65%$4.63
$1.62Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Product Overview
The DIG MP-122 is a low-flow pop-up micro sprayer with a 180-degree pattern, 1/2 in. male pipe-thread inlet, and 9 in. pop-up height.
Key Features:
- 180-degree spray pattern
- 9 in. pop-up riser
- 1/2 in. MNPT inlet
- Stainless steel spring
- EPDM and vinyl seals
- Designed for low-flow overhead irrigation
Common Uses:
- Edges of flower beds and groundcover
- Plantings beside walls or walkways
- Areas needing a retracting micro-spray riser
Technical Specifications:
- Flow Range: 0.15-0.63 GPM
- Operating Pressure: 15-30 PSI
- Nominal Pressure: 30 PSI
- Maximum Wetting Diameter: 11.2 ft
- Filter Requirement: Minimum 80 mesh
- Pattern: 180 degrees
Dimensions:
- Pop-Up Height: 9 in.
- Inlet: 1/2 in. MNPT
Installation Notes:
Install with regulated, filtered water and orient the half-circle pattern along the edge of the planting area. Flush the line before installing the spray head.
FAQ:
What spray pattern does it provide?
180 degrees.
How high does it pop up?
9 in.
Why Buy From Big Frog Supply?
Big Frog Supply provides clear product information, helpful support, and convenient online ordering for micro-irrigation projects.
